need help with hanging dynamite exhaust!!

[Domination]

i wanna run this b4 it gets dark but i can't figure out how to hang the freakin thing. It can with this cylindrical alum peace with a hole going starint through horazintally and vertically and came with 1 big and small set screw and what looks like a phillips head screw to hange it but i can't fugure out how please HELP!!

 

[mcvickj]

Run the piece of wire thru the top and bottom hole (vertical). Then use the proper set screw on the end of the pipe.

Edit: Click me for picture....

This should help you out with what I am talking about.

 

[Domination]

well mines for the t-maxx and the hanger wire doesn't come close to the hole and would have to sut and bend it to fit and i supposed to do that and also i see what you talking about but it also cam with another alum round peace that looks like the end of the pipe put instead of useing the big set screw like the pipe it has a hole for a small set screww and the phillips head screw I'm lost

i have THIS PIPE but it doesn't show the metal peace I'm talking about that came in a baggy though

 

[olds97_lss]

That's a bad link. Is it a 21 conversion or just a new pipe?

 

[Domination]

just a new pipe for the 2.5

 

[SkyMaxx]

First, most pipes that come with a hangar wire require the modeler to bend the wire to suit his pipe location.

Second, a good link to the pipe you have might help clear the air on this and get you some better answers.

 

[Domination]

i didn come with a hanger and the old one when it was bent it was too short but i modded a closehanger and got it to work last night then i burnt up a primary gear and hopefully ill have time to goto the lhs to get a new one so i can use it again tonight or tomarra. I deffinatly love the pipe though it bumped up the low end and top end a hole LOT