CAR-nage????? should be TRUCKAGE...
-
Welcome to RCTalk! 🚀
Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!
- ✓ Friendly & passionate RC enthusiasts
- ✓ RC tips & troubleshooting
- ✓ Buy, sell & trade RC gear
- ✓ Share builds & upgrades
My first ever MT Freestyle bash.. need some equipment advice.
- Thread starter godale03
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
If money is really a problem and they sell decent bulks, get front ones first. The rear bulks always lasted longer for me. Most bad landings are on the nose.
My bulks would either snap off at the shock tower or just crush from front to back depending on the landing. It was normally the rears that would break off the shock tower tabs. Oddly enough, that's how I broke the integy's, having them on the rear with a stock tower... the front integy's would just get all bent to hell and the screw holes would strip often in the front and rear. Their aluminum just sucks. But in a bind, they are cheap and should get you through a weekend with little problems.
My bulks would either snap off at the shock tower or just crush from front to back depending on the landing. It was normally the rears that would break off the shock tower tabs. Oddly enough, that's how I broke the integy's, having them on the rear with a stock tower... the front integy's would just get all bent to hell and the screw holes would strip often in the front and rear. Their aluminum just sucks. But in a bind, they are cheap and should get you through a weekend with little problems.
greenwing7
RCTalk Addict
- Messages
- 729
- Reaction score
- 0
- Points
- 0
- RC Driving Style
OHHH OHHHH did you win, lose, or draw? or did you get rained out?
- Thread starter
- #25
greenwing7 said:
That particular weekend we were rained out. I did race this past weekend though, and finished dead last 6 laps down. Not what I had hoped but you have to start somewhere... right? Thanks for asking.
Tom