Mondo
RCTalk Talkaholic
Aah, we have Micro fans here, I see
Being a Mod at YourMicro I obviously own some Micro RS4's, three to be exact.
Here's my CLK specs:
Penguin P3500LM PAN Chassis 150mm with:
Penguin P3501V Vertical Servo Mount upper deck
Penguin CF Servo Mount Plate
Penguin FG Centre Battery Mount Plate
Penguin rear deck with custom adapted coil/oil monoshock
Hitech HS81MG Servo (Vertical)
HPI Dual Link tie rod kit
Novak SPY ESC
Novak XXL RX 40MHz FM
Graupner Speed 300 motor (6V @ 7.2V)
Team Orion BB300 Motor Mount
HPI Ball-Diff with ceramic diff-balls
Losi thrust bearing conversion in right (diff) side wheel
GH front Ball-Diff II
Dry bearings all round
Alloy front pulley wheel
HPI Steel outdrives
HPI Steel Dogbones
Team Orion alloy steering knuckles
I use standard HPI wheels shimmed with O-Rings to prevent them pushing in and the inner wheel hubs are lightly sanded then painted with aerosol blackboard paint to prevent the friction fit wheels from coming loose.
The Bodyshell is a HPI Mercedes CLK done in metalic graphite with a matt black backing to darken the paint.
Wing is from the HPI Micro wing set, big but stylish and functional
A pic of it:
Being a Mod at YourMicro I obviously own some Micro RS4's, three to be exact.
Here's my CLK specs:
Penguin P3500LM PAN Chassis 150mm with:
Penguin P3501V Vertical Servo Mount upper deck
Penguin CF Servo Mount Plate
Penguin FG Centre Battery Mount Plate
Penguin rear deck with custom adapted coil/oil monoshock
Hitech HS81MG Servo (Vertical)
HPI Dual Link tie rod kit
Novak SPY ESC
Novak XXL RX 40MHz FM
Graupner Speed 300 motor (6V @ 7.2V)
Team Orion BB300 Motor Mount
HPI Ball-Diff with ceramic diff-balls
Losi thrust bearing conversion in right (diff) side wheel
GH front Ball-Diff II
Dry bearings all round
Alloy front pulley wheel
HPI Steel outdrives
HPI Steel Dogbones
Team Orion alloy steering knuckles
I use standard HPI wheels shimmed with O-Rings to prevent them pushing in and the inner wheel hubs are lightly sanded then painted with aerosol blackboard paint to prevent the friction fit wheels from coming loose.
The Bodyshell is a HPI Mercedes CLK done in metalic graphite with a matt black backing to darken the paint.
Wing is from the HPI Micro wing set, big but stylish and functional
A pic of it:
Attachments
Last edited: