"MadMaxx"Big Block Tmaxx Build

[hulkmaxx]

Nice lookin shocks man!

 

[Snook Man]

I have stock top shaft gears in for now.. I'm gonna see if I can figure something out to use those gears or shaft...maby find some pinions to modify for the shaft..?

I remove the stock plastic gears and install the Tekno 22T & 17T M1 pinions. Just add small flat spots with a dremel on the shaft to locate the pinion set screws accordingly.
(They don’t have to be Tekno’s, I just prefer them. Any Mod 1- 5mm bore pinion will work).

 

[hulkmaxx]

Snook your the man!:bow:

 

[Ckeithnitro]

I remove the stock plastic gears and install the Tekno 22T & 17T M1 pinions. Just add small flat spots with a dremel on the shaft to locate the pinion set screws accordingly.
(They don’t have to be Tekno’s, I just prefer them. Any Mod 1- 5mm bore pinion will work).

Thanks for the Info snook, I will get that on the go..

 

[Ckeithnitro]

MadMaxx is about 75% done

 

[TrxXJ00]

Awesome build nice work

 

[Ckeithnitro]

Here is the body I'm going with.. It's a slash Bajr body...

 

[Snook Man]

Whats your wheelbase with the chassis you cut? I like that body on there and may use 1 for my TMuggy.

 

[Ckeithnitro]

It would look good on your TMuggy too..
15"

 

[Snook Man]

Hmmmm, that’s perfect length.
How wide is it at the bottom below the door? My plan is for the body sides to Velcro to the stone guards with just 2 body clips on the top of the lid.
I’ve already fitted a ProLine ERevo slipstream body but I’m always looking for other options.

 

[Ckeithnitro]

It's 8.5" wide at the doors...

 

[Snook Man]

Looks sweet, love the color scheme.

Too wide as I suspected being for a slash, I need 7” for a good fit.

 

[Ckeithnitro]

Thanks Snook Man...
You will find a cool body that works..
Your build is gonna be killer!!

 

[hulkmaxx]

Nice build man! Thinkin bout that body for my MGT build now.

 

[Ckeithnitro]

It would fit good on your MGT Hulkmaxx....

 

[Alexander_0_1]

Where did you score your lid? I want one for one of my savages.

 

[Ckeithnitro]

Where did you score your lid? I want one for one of my savages.

Local great hobbies in edm..
It's for slash- BAJR body

 

[hulkmaxx]

CKEITH I have been searching for this body also but its been pretty hard to locate. I have been seriously considering it for my MGT build!

 

[Ckeithnitro]

I looked today and Amainhobbies / RCplanet / and TowerHobbies all have stock of this body..
Jconcepts Bajr

 

[Alexander_0_1]

Thanks Mine'll be here on Friday with some other things that made shipping free.