lost part

[hotrodrob]

So I recently aquired an ofna buggy and figured out the engine has an air leak so I pulled it out took the carb off and took the back plate off as I inspected it I realised that I must have lost some sort of pin or something that allows the pull start to spin the crank/connecting rod so my question is what is this part and what does it look like,or maybe my inner idiot has takin over my mind and not allowing my hands to properly assemble this backplate,it is a force3.5 engine.,any info would be greatly appreciated thanx.

 

[wvaughn7]

There should be a one way bearing that goes inside the pull starter and slides over the crankshaft sticking out the back of the engine. This is what it looks like and if you happened to have lost it this link is about the best price you will find on one. http://www.ebay.com/itm/Ofna-52093-...Control_Parts_Accessories&hash=item43b1de0c3f

 

[hotrodrob]

What I'm looking for is inside the engine after the backplate is removed,there must be a pin that connects the connecting rod/crank to the shaft that the one way slips over,sorry you misunderstood me I should have been more clear.

 

[Racer 1966]

There should be a tiny spring and and small pin that fits in the crank. Ofna part #52098

 

[wvaughn7]

Sorry for the misunderstanding and Racer is correct, Although I just pulled my Force 26 apart literally 5 minutes ago and there is only a pin, no spring. I don;t know if this is just for this model of engine or mine is supposed to have it.

 

[hotrodrob]

Sorry took me a while to get back to ya fellas got múltiple projects goin on,and beer dnt help remember stuff either,anyway the pic above is exactly What i lost thanx for helpin me out.