Sold / Found looking for some paddles for a brushless 4x4 slash (4)

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Status
Not open for further replies.

beason

Bash, Fix, Repeat..
Messages
7,012
Reaction score
17
Location
Webster, TX
RC Driving Style
  1. Bashing
I want to try water skipping, but I don't want to pay $60 for tires I wont use very often. lol

anyone have some laying around?
 
I noticed that those are 17 mm hubs so you would have to change or adapt your hubs on the slash in order to make those tires work
I use these: https://www.ebay.com/itm/362777100729 They are cheap, they work, and they are available in several colors. One thing i did learn, Loc-Tite the nut that holds them on or it will come loose.
 
What about these: https://www.ebay.com/itm/4pc-RC-1-8...135648?hash=item2178888ce0:g:tQwAAOSw~gxfbpBg They are a bit large though, at 4.9" outside diameter. The stock Arrma DBoots are a 4.1" outer diameter, which should be close to the stock slash diameter, so they are roughly 3/4 of an inch bigger.
at 3/4in bigger i dont think they would fit under the body. the slash is tight as it is.
I noticed that those are 17 mm hubs so you would have to change or adapt your hubs on the slash in order to make those tires work
good catch!
I use these: https://www.ebay.com/itm/362777100729 They are cheap, they work, and they are available in several colors. One thing i did learn, Loc-Tite the nut that holds them on or it will come loose.
i dont mind changing to 17mm if i need to, that should be an upgrade in general. how much width do they add though?
 
Status
Not open for further replies.
Back
Top