Legendary thunder

[chuckdubz]

The rear gearbox is not meshing right inside, how can I adjust them.

 

[9x19]

Welcome,

I don't have that model, but if this is where your motor meshes with the gears, if there is an adjustment, it is usually the motor that can move by loosening its mounting screws. Put a piece of paper between the gears while you re-tighten, that should set the gear mesh correctly.

 

[chuckdubz]

Welcome,

I don't have that model, but if this is where your motor meshes with the gears, if there is an adjustment, it is usually the motor that can move by loosening its mounting screws. Put a piece of paper between the gears while you re-tighten, that should set the gear mesh correctly.

Thank you, those gears are meshing good, it's the ones inside there rear differential that aren't meshing.

 

[9x19]

Differentials usually require shims to adjust the mesh, but you'll need to know the diameter of your input/output shafts as well as the outside diameter of the bearing that supports them.

Once you have the correct size shims, it's a game of add a shim and check the mesh until you find the combo that gives the proper mesh without binding.

 

[chuckdubz]

Differentials usually require shims to adjust the mesh, but you'll need to know the diameter of your input/output shafts as well as the outside diameter of the bearing that supports them.

Once you have the correct suze shims, it's a game of add a shim and check the mesh until you find the combo that gives the proper nesh without binding.

Thank you, very much! Once I figure out what you just told me, I'll do it... It may take me a minute, but thank you.

 

[tntpoof]

You can buy a small package of shims for some brands. you can also buy pieces of hardened shim stock.This is the leagendary rc sold on amazon correct?
you can do a search on amazon for rc shim stock... id get a set of calipers to get correct size ..

 

[Tunedfrog]

Welcome in @chuckdubz , thanks for joining us.
Amazon has variety packs of shims. It's always nice to have some around.

 

[tntpoof]

https://www.bing.com/ck/a?!&&p=ace9...NkFDOTg0MUY2ODVCMTVGMkY4MiZGT1JNPVZJUkU&ntb=1


how to shim a gear diff video above

 

[chuckdubz]

https://www.bing.com/ck/a?!&&p=ace9...NkFDOTg0MUY2ODVCMTVGMkY4MiZGT1JNPVZJUkU&ntb=1


how to shim a gear diff video above

Thank you

Welcome in @chuckdubz , thanks for joining us.
Amazon has variety packs of shims. It's always nice to have some around.

Thank you

You can buy a small package of shims for some brands. you can also buy pieces of hardened shim stock.This is the leagendary rc sold on amazon correct?
you can do a search on amazon for rc shim stock... id get a set of calipers to get correct size ..

Thank you