Kershaw Designs Servo?

[flatblack]

Piggybacking off of Metalhead Matt's post about Kershaw Designs, I thought I'd see if by chance anyone has ran this servo?

http://204.186.93.64/Servos.htm

Seems like a decent deal.

 

[Rolex]

I haven't heard of that brand before, but.....

Metal gears. 0.16sec/60degree(6v), 208 oz/in(6V).
All that for $25? That just might bring down all the other prices.

 

[Lessen]

Value is certainly no question if the numbers aren't inflated. Durability is the main concern. Pretty good gamble for $25

 

[abadk9420]

I would have to agree, at $25 bucks if it ended up sucking your not out much, and if it works great then you got one heck of a deal....probably make a good dig servo for a crawler..

 

[Rolex]

208 oz/in(6V)
I'm already tempted to get one for the Savage steering and use the Hitec 645MG for the throttle.
If these prove to be reliable, then these will be the only servos I'll use in the future. We'll see.

 

[destrucktomaxx]

But Rolex....it's not shiny enough for the Savage, lmao jk jk.

 

[flatblack]

I just bought some much needed Center CVD's or I would pull the trigger on this and be the test mule. Who's gonna step up?!

 

[hipluther01]

Shipping is cheap as well. That is a really tempting deal. Thats about the size servo I'm wanting for my maxx for steering.

 

[hipluther01]

I've been emailing back and forth with Mr. Kershaw about his servo's. They have brass gears and are analog, not digital. I think I'm going to grab one and put it on my steering for my Tmaxx.

 

[Rolex]

If you're the firstest with the mostest, keep us posted. I have a feeling there might be quite a run on these if they test well.

 

[hipluther01]

Well I'm waiting on a reply from him to let me know if he has them instock and if they are his design then depending on his answer.. Ill prolly order one.