Just a mashup dont know where to put it

[Oggydoggy'n'doggydaddy]

2wd rod racer custom built on scx10-2 chassis (has waaaay too much torque snaps engine plates reaches 78mph when it doesn't until it breaks) project temporarily abandoned until solution is found
Custom 3d printed transmission
All metal gears final drive at tail is 1:30 paired to the stock 4:2.5 rear
Cummins 12v engine housing with titan t55 motor direct drive16t gear to a 24t worm with a dry clutch (keeps the trans from blowing apart had it happen 6 times till i figured it out)
Stock rear gearing for everest 10 with upgraded metals
Metal drive line
Front steering is completely custom single leaf ford styled suspension of the late models
Rear is spring and leaf for stiffness
Battery is a 1200mah 2cell compact that hides in the flatbed box
Stretched crawlers still on the rear got drags on the front but not unburying it now

Panda6x6 doesn't get used much

Hbx devastator with 74 gmc body
Stock

Carisma coyote (project in the works)

Scx24
Upgraded to high clearance links added some weight and a hardbody custom suburban

Some pics of the first indoor course and we plan to rebuild it

Some still in parts

Scx10-3
Tamiya stadium racer
Scx24
Scx10-1
Deadbolt

Plans
Custom pulling trucks
Kid wants to do demolitions
And maybe some more crawlers might get a couple drift or maybe some tractors idk

Extended
The second times the charm...made the axle house 1/4 inch thick and she made it to 78.3mph once on a 2s then broke the engine house plate on the way back i assume i cracked the plate on launch after 7 rebuilds of it getting thicker it was dangerously close to the edge
Mooore

 

[RET4RD]

That's pretty wicked bro. I think it's kinda cool how ur 3d printing everything. But if u ever want to upgrade from ABS, try asking around for a local fab or machine shop with at least a 5-axis CNC and see about pumping out some custom parts from aluminum and carbon fiber. I'm sure they'll hook u up

Also where can I get that 6x6 panda

 

[ippy47]

Thats awesom but have you ever considered the ssd scale transmission or Are you set on printing your own? Either way this thing is awesome and a really cool design. I was also thinking about making some for the road out of a crawler chassis.

 

[Oggydoggy'n'doggydaddy]

That's pretty wicked bro. I think it's kinda cool how ur 3d printing everything. But if u ever want to upgrade from ABS, try asking around for a local fab or machine shop with at least a 5-axis CNC and see about pumping out some custom parts from aluminum and carbon fiber. I'm sure they'll hook u up

Also where can I get that 6x6 panda

Towerhobby has the panda and i just got a roll of abs i was using pegt because it was stronger then peg and still wasn't enough penntech is near me i thought about emailing the file to the technical design and drafting class and see if they couldnt make an aluminum

 

[Oggydoggy'n'doggydaddy]

Thats awesom but have you ever considered the ssd scale transmission or Are you set on printing your own? Either way this thing is awesome and a really cool design. I was also thinking about making some for the road out of a crawler chassis.

I'm dead set on fully custom because with the transmission i can set my own top speed as it is 4.63 seconds and its out of range from right next to me 7.21 for full limit to limit I'm not using it for drag comp I'm actually building it as a openwheel modified class for dirt track ripping it would not qualify or be competitive at all to use this its more of a jay Leno complex with the car i did it to say i did
https://www.kapwing.com/videos/62e2d08a6fdd9f006e9fecee

 

[Oggydoggy'n'doggydaddy]

Pulled it out of the clustered closet this is the trans and damage and i was wrong from trans output to axle output is a 1:1 ratio which speed is determined by the power and motor. I forgot i made it a 3 piece trans and its got 50ml of 90w royal purple gear oil in it

I just now noticed the crazy space i have so i may reprint this transmission ALOT thicker maybe make it look like a sag mun 3 speed make the bell almost solid right up to the motor face its going to have copper core ran through it to a radiator going to use an extended shaft and put a pully on the case of this pc water cooling fan kit i cut down to just the motor and fan barrel "the motor pumps the water" which had an inlet outlet tube
If you pc overheats by the way garbage old motors that still work will cool extremely well when directed to the 5v power supply p.s its very noisy"just tested it"

 

[ippy47]

Pulled it out of the clustered closet this is the trans and damage and i was wrong from trans output to axle output is a 1:1 ratio which speed is determined by the power and motor. I forgot i made it a 3 piece trans and its got 50ml of 90w royal purple gear oil in it

View attachment 149769

View attachment 149770
I just now noticed the crazy space i have so i may reprint this transmission ALOT thicker maybe make it look like a sag mun 3 speed make the bell almost solid right up to the motor face its going to have copper core ran through it to a radiator going to use an extended shaft and put a pully on the case of this pc water cooling fan kit i cut down to just the motor and fan barrel "the motor pumps the water" which had an inlet outlet tube
If you pc overheats by the way garbage old motors that still work will cool extremely well when directed to the 5v power supply p.s its very noisy"just tested it"

Thats crazy work! I commend the effort and can't wait to see a video of this thing

 

[Oggydoggy'n'doggydaddy]

Thats crazy work! I commend the effort and can't wait to see a video of this thing

Some day ...i may tackle this again in the winter with some new ideas I've had flopping around