Jammin X1-CR & O.S. .21 VZ-B V-Spec-T (P)

[Ofna1]

What will I need to do to convert my Jammin X1-CR RTR to the O.S. .21 VZ-B V-Spec-T (P) ?? Do I just take the pull start engine out and put the clutch and flywheel on the O.S. motor and slap it in ? Does it use the same motor mount and what starter box would you recomend, it will need to start the X1-CR and the Hyper 8 that I have.

 

[jetmechG550]

You may need a different motormount or a larger flywheel. Chances are the mount so you'll be able to use the bump box.

 

[psunitro]

If you need new mounts(not sure if you do or not) look at the 1 piece mount.
here is a good thread on boxes........
https://www.rcnitrotalk.com/forum/showthread.php?t=46251

 

[Ofna1]

Thanks for the info guys. Any sugestions on the mounts ? I an one better than the other ?