is this good

[nicholas655]

http://www.hobbyhobby.com/store/product_info.php?cPath=24_220_221&products_id=333


will this fit on the revo 3.3 no problems invovled , and is it the same power about, my lhs said that i mighthave problems with the throttle linkage , no hole in the end of the carb to pull it open .

or this one
http://www.hobbyhobby.com/store/product_info.php?cPath=24_220_224&products_id=1223

 

[scoobydoo2u]

i dont know about the others but if i were you i would just go for 18tm..

 

[nicholas655]

i dont know about the others but if i were you i would just go for 18tm..

i asked the lhs and he said i wouldnt get nearly as much power as the orinal engine , is that true, could you give me the exact engine i should buy , that fits in th revo

 

[jon2]

Not sure why you would go with the CVRX when the 18TM is available.

The 28 will fit but you will need a big block conversion.

 

[.21Rc10GT]

The 3.3 is one mean engine. The Sirio .23 would drop in, along with the RB 323 and 523. All 3 of those are great, and won't add a lot of excess weight like that .28.

 

[jon2]

I second the OS18TM or the Sirio 23... Both amazing power.

I think mated with a good exhaust would for a killer combo.

 

[olds97_lss]

Neither engine you asked about will install without more parts. The 18 you posted won't fit well at all since it's a side exhaust. Unless you have someone make you a custom header, it doesn't fit well. The rotary carb would be a pain in itself.

The 28 won't fit without a conversion kit. Depending on what kit you go with, you will have issues with it being so tall. If you try to go with new era's BB leaner kit, it sticks up above the roll bar about 1/4-1/2 inch.

With the 18TM being around $150, I'd suggest just that and a new exhaust. It will work with stock, but it will work better (much better) with something else. I ran it with a fantom works pipe. It was one heck of an engine with that pipe.

 

[nicholas655]

i have a trinity pipe just got it actually last week, (love it) but the os 18 tm I'm seeing on the net is going for over 230 canadianabit too much ,got a good site with that motor that you are talking about at that price

http://www.gravesrc.com/OS_18TM_ENGINE_REVO_MANIFOLD_p/osm11931.htm

i think i found it

 

[Mallanaga]

uhhhh, tower for the win. same price, but their service is unmatched. plus they have some deals going on! http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXHLV8&P=ML

if you check out their main page... http://www.towerhobbies.com/index.html

up to 149.99 and you save $10. bump up to 175 and save yourself $15! enjoy.

 

[jamierevo]

i have a picco max 26 and run very fast !!!!!!!!!!!!!

 

[hamz9561]

I also would recommend the .18TM. I've heard nothing but good things about it and am going to be installing one in my uncaged Revo Basher.