I repinched my worn 2.5r with a hose clamp now one side of p/s black?

[TypeONegative]

Ofter repinching my trx 2.5r with a tor h and hose clamp one side of my piston and sleeve is black, is this because of unequal pressure? I did manage 5 tanks of performance now it keeps overheating at 45 degrees f outside at 7 turns out on the hsn, i have a new p/s and a new engine, but i want to use this one until the bearings fail, does this look like a reason to overheat and bog at 7 turns out hsn and stock lsn settings? Thanks in advance

 

[olds97_lss]

You probably made your sleeve out of round and now are getting blow by. There are special press tools made for that. The "clamp" ones don't do a good job at all.

 

[cbaker65]

You should just buy a new Pist/sleeve ,you can catch that size real cheap on E-bay!
I've seen those many times pop up for 20 or 30 bucks!....