I hate this.

[Joehpi1]

Well i mess the cone thing that hold the fly wheel. It looks like it it was striped. So i went and put the stock cone looking thing and the stock fly wheel. And it still does the same problem and i hate because almost striped my gears. I have a hpi rs3 4 rtr with a 18 os max engine. Could someone help please.

 

[Buggyracer28]

Are you talking about the brass collet that goes on the crankshaft? That is supposed to be smooth. You need to tighten your flywheel with a flywheel wrench.

 

[Joehpi1]

Well I tighten the fly wheel really tightas i could. And it did it again, I'm so mad about this . And when i start it up . It will Stay on but when i hit the gas it makes a funny noise and shuts off.

 

[Diver6127]

You probably need to shim behind the collet. Your flywheel might be hitting the chassis. Check for clearance.

 

[Joehpi1]

There allot of clearance between the flywheel and the chassis. There not enough clearance between my gears and my fuel line. How can u tell if ur clutch is bad .

 

[FastEddy]

Joehpi1,
We would love to help you but your information is difficult to understand. You will need to do some research and give us the proper names of the parts and better describe the issue using the proper names. After you have learned the names, take a pic of the parts as they are on your car.

We would love to help but need better info.