HSN setting?

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Renegade88

RCTalk Talkaholic
Messages
278
Reaction score
0
RC Driving Style
My HSN setting ranges between 3.5 and 3 and 3 quarters out for a happy run. Just curios what you guys needle is set at?
 
What engine?

On my Hyper I range between 2 and 3.5 turns out. Depends on the outside air temps.
 
Originally posted by Renegade88
My HSN setting ranges between 3.5 and 3 and 3 quarters out for a happy run. Just curios what you guys needle is set at?
3.75, man that's rich. My HSN is set somewhere about 3.75 or 2.5 and my LSH is about the same.
 
I run the stock 21BB and the HSN is out about 2 1/2 to 2 3/4 turns.
 
My lsn is at 1.5 if I richen it up it just dies at idle and wont pull off even when hot.
 
It is possible that if you had, at one time, tightened it too much you may have put a ridge around the needle. This will cause it to allow more fuel to pass than it normally will if not damaged.
Just a thought.
 
Nah I checked, no ridge. It runs fine though!
 

Similar threads

Back
Top