HPI Super Nitro RS4 Build #1

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
A little bit of behind the scenes work has been done to the super. I’ve been slowly switching out all the screws for black, and peeled off some stickers.

I grabbed an electric super one-way diff kit for cheap
6743E768-335C-4656-B826-A1F7FD716E0D.jpeg

I ordered a Nitro ball diff pulley for it but the inside diameter is too small
729CAC28-BF04-4E87-AB42-97A4EBA6BAF1.jpeg


So I drilled it out with an 11/16 bit and it fits perfect 👍
B520EA12-C50F-4CE1-88E2-14830434F7FD.jpeg


Glued the two halves together and greased the drive cup shafts
0C3A73E9-F8FF-4010-8CA1-DFB8A9F81DE0.jpeg


Taking the stocker out
6D26DF26-170E-4F9F-B618-705E542665A8.jpeg

92E2379D-6602-4CAC-B10F-11465940639C.jpeg

5BB83686-392C-4173-BFEE-A51C837EC40F.jpeg


All zipped up
BC24520B-291D-4D82-9219-D5ED30711979.jpeg


I’ve also installed a new GPM steering assembly, that’s why the wheels aren’t aligned. Just waiting on some ball studs to connect it all together
 
Swapped the front diff pulley, upgraded the rest of the hardware, changed the front C hubs to carbon graphite, peeled off all the stickers, swapped out the fuel tubing and took some decent pictures
009E9E9E-8125-446B-9DE1-6A5B228F5F7C.jpeg

8608C8CE-F6D4-41CB-857D-2D2824FAD846.jpeg

86C4351E-EDCC-4ED4-A713-B6582ED13290.jpeg

3A19EF14-DDFC-463B-B38D-368853DF31AB.jpeg

422D759B-A5E8-4201-AA92-4309BBDB260A.jpeg
 

Similar threads

Back
Top