HPI MT2 steering problems

[mrbones]

I have a HPI MT2. The steering on it is completely crazy and I don't know what to do to correct it. When I push down on the front until it bottoms out, both front tires turn outward at least 1/4". All the front end parts have been replaced with aluminum. (I didn't do it!) Also I have to limit the travel of turning because it will blow the dog bones right out. This thing runs around in the yard just fine but if I put it out on the road, the steering is so crazy that it might just go anywhere, and it's real bad when I try to stop. I don't see anything I can adjust to correct this. Did the replacement of all the stock parts w/ the aluminum parts cause this? I read the PDF instructions for assembly and I don't see any info on how to adjust steering problems. Help please.

 

[Metalhead Matt]

The turnbuckles may be on the wrong side of the steering knuckle. If they're mounted on top, try em on the bottom and vice versa.

 

[Phins Fan]

Try and post some pics. I rebuilt a MT2 I got off another member on here earlier in the winter and if I can see what you are talking about I may be able to point you in the right direction. A couple pics of how the front end is set up if popssible

 

[mrbones]

I am working nights. I will look at it tomorrow when I get up. I will also have to look at what photo program I have available to resize pictures so I can upload them.

 

[Phins Fan]

It took me quite awhile but photobucket works pretty well.

 

[mrbones]

I think Metelhead has it figured out. The assembly instructions show to mount the balls and rod ends on the bottom. They are presently on the top. (I didn't do it!) I will flip them over and let you know what happens.

 

[mrbones]

Metalhead, you guys are just amazing in the knowledge you have with this hobby. I hope some day I can learn at least half of what you guys know. Thank you. It worked.

 

[Metalhead Matt]

Never a problem.