gnarkill
RCTalk Talkaholic
How to build a wooden ramp for rc's
Box 1: Make 2 pieces of ply wood cut like this in your own desired shape/size/angle
Box 2: Stand the two up and connect the sides with 2x4's
Box 3: Put a thin piece of plywood on it and screw it on the edges of the ramp
Box 4: Make a "U" with the wood and screw it to the back like above in red
Box 5: Thats all. Hope you build it. Hope you like it.
Attention!- In the second step screw the plywood to the 2x4's on each side.
post image of the ramp that you make in the comments so I everyone can see them.
Box 1: Make 2 pieces of ply wood cut like this in your own desired shape/size/angle
Box 2: Stand the two up and connect the sides with 2x4's
Box 3: Put a thin piece of plywood on it and screw it on the edges of the ramp
Box 4: Make a "U" with the wood and screw it to the back like above in red
Box 5: Thats all. Hope you build it. Hope you like it.
Attention!- In the second step screw the plywood to the 2x4's on each side.
post image of the ramp that you make in the comments so I everyone can see them.
Last edited: