• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • ✓ Friendly & passionate RC enthusiasts
    • ✓ RC tips & troubleshooting
    • ✓ Buy, sell & trade RC gear
    • ✓ Share builds & upgrades

HOLY MOLY, I Just Snapped The Front-End Off The Frame!!!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
A

arawak420

RCTalk Addict
Messages
769
Reaction score
0
Points
0
RC Driving Style
i couldn't make a turn fast enough and i just snapped the front-end off the frame and broke off the skid plate. the wheel snaked a chain link fence AND RIPPED THAT SOB RIGHT OFF!what is that section of the front end called that holds the front end on? can i just replace that piece that is holding the front-end, shocks, and drive train together? everything still is in good shape tie-rod is a little bent.

person that had it before had the servos on wrong/backwards/opposite. the steering is the gas and the gas is the steering. i'll try and make pictures to show you and post them shortly.

HELP
 
Sounds like you are referring to the front bulkhead.

Go to Traxxas.com and look up the T-Maxx parts list. It will be in picture and drawing form. See if you can identify the piece and then you will also get an idea how much it costs. Once you know what the piece is you can also get aftermarket parts, too, but usually they are aluminum and cost more than the Traxxas part.

AND GET THOSE SERVOS BACK WHERE THEY BELONG!!!!!
 
thanks revo. i live in the desert with all this dirt and land and I'm driving it around my dirt road. pretty bright uh? I'm putting those servos back this evening.
 
Last edited:
i think its a little bit older than that. .15 thats was rebuilt.
 
arawak420 said:
i think its a little bit older than that. .15 thats was rebuilt.
Click to expand...
Thats ok I have one also and the newer parts will fit it, I think the only differance is the new one has wider suspension and the engine is slightly diffrent. :cheers:
 
one time i was messin with my servos and radio on my maxx and i switched my steering to throttle and throttle to steering you may want to check what all the channels are set on. good luck
 

RC Builds

Back
Top