High Torque Servos For Xxx-nt

[hawkbadass]

Hey gu7ys i was wondering if the high torque servo for the xx-nt really improves the performance for the steering if any of u guys know it would be a big help if u would let me know becaz i was thinking of buying one but idk.

 

[RustlerDood]

http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXTT13&P=0

Specs: Airtronics 94358Z ERG-VB Hi-Speed/Hi-Torque 200 oz/in @ 0.10 sec resp. time

 

[Tucker]

Or if you're on a budget and don't want a top-of-the-line 1/8th buggy spec servo you could try the Hitec 625MG, or if you really want to push the boat out the Hitec 925MG.

The 625MG is used as a steering servo by many folk on a budget for their 1/8th buggies, it has plenty of torque for something lighter, and a nice turn of speed.

 

[ImBroken]

The Airtronics servo mentioned above, would really be overkill for a XXXNT. Great servo, for an 1/8th scale.. I would recommend the Hitec HS-945MG for steering.. It has 153oz torque, with a decent speed of 0.12 Sec/60 Degrees...
That would be my choice, & yes, you will see a big difference over the stock servo...

Great site for servos...
Servo City