gpm knuckle compatibility

[stariondriver]

it say on the rcxshop i need all these parts.
link.....
http://www.rcxshop.com/product_info.php ... cts_id=763

quote " If installed on the LST 2, all these parts must be used together:

LST021 x2 (Spindle / Steering Knuckle)
LST054 x2 (Upper Suspension A-Arms)
LST055 x2 (Lower Suspension A-Arms)
LST1019 x2 (Carrier Hub)
SLST12135C x2 (Heavy Duty Universal Swing Shaft)
TLST1101 x1 (Pivot Pins / Hinge Pins)"

from my reading on here these will bolt right in my stock aftershock stuff correct or no?

 

[olds97_lss]

Not sure what's up with your link, but it's not really a link to anything anymore.

If THESE are the parts, I'm 99% certain they are for the older LST1 and will work on the aftershock.

These are dynamites for the LST2:

These are dynamites for the LST1/AS:

These are the ones above I think your talking about by GPM:

The bearing hole size looks like LST1 as does the length of the little arm that ties to the turnbuckle.

Looks like AMain is selling off their GPM stuff at low rates too.

 

[stariondriver]

thanks. looks like what i need is the new era ones for ls2.

 

[olds97_lss]

Uh... what? Do you mean you want all the LST2 stuff?

 

[stariondriver]

Uh... what? Do you mean you want all the LST2 stuff?

i want to use the lst2 axles eventualy. i am also considering keeping the aftershock rear toe links when i goes to last2 axles