Glow ignitor problem

[Mc chris repin gtown]

Hi every one I brought a glow ignitor and charger less then a week ago
And all of a sudden it stopped working
I went to drive my car yesterday it started once an won't start again. I've put the ignitor on a spare glow plug I have an it didn't glow so I thought it was dead...
But no it can't be..
I put it on charge all night and still nothing
Can any one tell me wat it could be from..
P.s the red light on my charger dont come on either

 

[Rooky78]

Is it the Duratrax igniter? I'd the red light doesn't come on, it probably isn't charging.

 

[Mc chris repin gtown]

No its not a duratrax charger.
Its just got ac adaptor written on it
I got it from toy world
Its one of those green ones I'll show a picture of it soon

 

[Rooky78]

The charger for my Duratrax igniter just says AC adapter as well.

 

[Mc chris repin gtown]

The charger for my Duratrax igniter just says AC adapter as well.

Oh...OK
Thanks for helping me.

Oh...OK
Thanks for helping me.

Oh...OK
Thanks for helping me.

 

[cbaker65]

Can you take a clear pic of the igniter itself?
Some of the ones that you take apart ,lose contact from the tube that connects to glo=plug.
Some of them do come apart like the metered ones ,they lose contact from the meter to the
battery.

 

[Mc chris repin gtown]

Can you take a clear pic of the igniter itself?
Some of the ones that you take apart ,lose contact from the tube that connects to glo=plug.
Some of them do come apart like the metered ones ,they lose contact from the meter to the
battery.

 

[cbaker65]

How old is the igniter?
I'm not familure with that one ,so I don't know if that tube comes apart.
Mine come apart ,an I have to clean them every now & then.
Does the red light come on the charger like what was asked ,that should also
tell you if theres a bad conection.

 

[TMaxxMike]

Make sure you have power at the outlet where you are plugging it in. Sometimes they are on a switch that mysteriously get turned off. Plug something else in and make sure there is power. Use the process of elimination. Check it on a brand new glow plug also. I had one glow plug burn out immediately and thought my igniter was bad. If you have a meter it would be great because you can check the output voltage of the charger. Then you can check the voltage of the igniter. That should narrow it down a little. Good luck.