ApriliaRacer
RCTalk Champion
- Messages
- 221
- Reaction score
- 0
- Points
- 0
- RC Driving Style
I've got an Ofna 9.5 Pro ARTR with extras for sale.
Comes with;
Torsen Center Diff
Both "C" hubs (currently mounted up) and PBS arms and knuckles
Mounted up Panther Tires
OS RG engine (pull start) with 063 pipe
Spare front and rear diffs built with 3k and 7k diff fluid
Hitec Hi Torque steering servo and JR throttle servo
Novak XXL receiver 75 Mhz
HPI receiver hump pack
Nicely painted body
All you need is a transmitter (I'm running a MX-3, so I'm keeping it for my other RC vehicles), glow starter, fuel and thats it. You can pick up a transmitter on ebay for around 50 bucks.
Buggy has only been run once on the street after assembly completion. So, just a couple scratches on the bottom. But otherwise near-mint condition.
The OS RG is good condition. I got it off ebay, I believe its has a slight leak at the carb/engine case joint. Haven't taken it apart, but believe that the previous owner probably lost the rubber "o" ring as I see thats where the fuel appears to be coming from. It has silicone around the joint, but it needs the "O" ring.
With all the "stuff" would like to get 500 bucks obo ...
or can sell as a roller for 300 bucks. (plus shipping and insurance)
Sorry NOT interested in any trades
thanks!
Comes with;
Torsen Center Diff
Both "C" hubs (currently mounted up) and PBS arms and knuckles
Mounted up Panther Tires
OS RG engine (pull start) with 063 pipe
Spare front and rear diffs built with 3k and 7k diff fluid
Hitec Hi Torque steering servo and JR throttle servo
Novak XXL receiver 75 Mhz
HPI receiver hump pack
Nicely painted body
All you need is a transmitter (I'm running a MX-3, so I'm keeping it for my other RC vehicles), glow starter, fuel and thats it. You can pick up a transmitter on ebay for around 50 bucks.
Buggy has only been run once on the street after assembly completion. So, just a couple scratches on the bottom. But otherwise near-mint condition.
The OS RG is good condition. I got it off ebay, I believe its has a slight leak at the carb/engine case joint. Haven't taken it apart, but believe that the previous owner probably lost the rubber "o" ring as I see thats where the fuel appears to be coming from. It has silicone around the joint, but it needs the "O" ring.
With all the "stuff" would like to get 500 bucks obo ...
or can sell as a roller for 300 bucks. (plus shipping and insurance)
Sorry NOT interested in any trades
thanks!
Last edited:
