flywheel help

[Macguyver]

hey guys ....I'm looking for a flywheel for a wasp .18 with standard shaft ....the shaft has 5 mm threads

I'm pretty sure i found what i need ...but its in the UK

http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=260661786435&ssPageName=STRK:MEWAX:IT

i also found one for the trx pro .15...it looks like what i need ...but I'm not sure of the shaft threads size on the pro .15

anyone out there with a pro .15 that could tell me the size of the shaft threads

thanks

 

[Macguyver]

its basically the clutch nut with the shaft on it that i need ..but I'm not sure what length to get ...I've found some ranging from 16mm long to 30mm long ( i know 30mm is to long)..i would need around 20mm long( i think ) (nut & shaft) but i can't seem to find any that length...it has to screw on 5mm threads

 

[Racer 1966]

I got one in the shop, I'll go check it for you.

 

[Macguyver]

I got one in the shop, I'll go check it for you.

cool thanks

 

[Racer 1966]

Ok bro,it looks like the Pro .15 will work for you. It is right at 20mm overall length and has 5mm threads.

 

[Macguyver]

Ok bro,it looks like the Pro .15 will work for you. It is right at 20mm overall length and has 5mm threads.

thanks allot bud ..thats what i needed to know

 

[olds97_lss]

I used the stock flywheel from a t-maxx and this: http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJF69&P=7

I ran that engine in my maxx for a while.

 

[Macguyver]

I used the stock flywheel from a t-maxx and this: http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJF69&P=7

I ran that engine in my maxx for a while.

ya ..i found one on ebay ....ill be using my revo flywheel with it ...and i just double checked the part number with the one you suggested just to make sure i ordered the right one

thanks