• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • Friendly & passionate RC enthusiasts
    • RC tips & troubleshooting
    • Buy, sell & trade RC gear
    • Share builds & upgrades

First Time on a Track..........

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

ThunderHawk

RCTalk Qualifier
Messages
167
Reaction score
0
Points
0
Location
wintersville
RC Driving Style
Hi Fellas!!

Well, I took my first trip to the track today. As I have said the owner of my LHS allows free use of his tracks. It is a small track that you can run an Oval...or turns, whoops, and a decent jump...I imagine that is a standard design...Anyway, One glaring flaw with my ride became apparent right away...It really pulls to the Right...BAD. I also was having some other issues with the steering...5 minutes with the LSH fella and I learned something new....I was keeping my pivot ball "holders" set too tight. Well now I have more steering than I know what to do with....but it was still pulling to the Right. Tonight I sat down and tried to straighten it out some...The Servos are not fighting each other so much as I messed up the alignment while working on it at some time.

Today’s purchases included the adjustable rear A arms and new axle carriers. I found a crack last week in the front right carrier and after coming up short on the jump...it popped out again so I changed it. Another victim or victims of my run today were the pro line bowties that I mounted on HPI rims. My glue did not hold and I blew out the bead on all of them...It appears the glue I chose sucks...or I did something wrong....Back to the drawing board on those I guess....

Anyway, I drove a little better than I thought I would and I finally experienced some "jumps"...I was able to put a few good laps together but the "pulling" issue made it tough to get a good run on the Oval. I was constantly fighting it and that made it tough to "set-up" for the turn like I wanted to...

Well the rear A arms are now installed and I like the stance it gives it. I may now be able to run a softer shock with out as much "sag". It appears that moving the wheels back took some of the weight off the rockers....It feels that way anyway, I won't know until I get it warmed up again and the shock oil get warm....Anyway, sorry for the length....just felt like writing about my day. I do have a new found respect for you guys that race...I am definitely going to put in some more practice time before I race. I have a long way to go...Thanks for reading....


Hawk
 
congrats dude.. i have yet to go to a track for i can't find one...:( i want to try it thoug.. is it true that they say it is way more fun than a back yard?
 
Backyard, yes...Construction Site or other good bashing spot...Nope! LOL. I do look forward to racing when I get better...I am sure it will be fun. But I will probably always be a basher that races once in awhile....I find myself seeing places and wondering what it would be like to spend the day bashing there!!


Hawk
 
hey there, yeah i suggest getting more track time in and start racing! its amazingly fun to race even if you come in last place!
swarmtjr-yes it is soooooo much more fun on a track than a bashing spot!! I can't even begin to explain!
 
lol.. where can i go to play? i can't find anything near me, but yet there are hobby stores all around.... any ideas?
 
go to the hobby shop and buy a couple sets of cones, find a rough area and set up the cones!
 
just to help out a little you might want to check your axle pins and make sure your not missing one. when i had my revo it was doing the same thing and thats what the problem was. just trying to help.
 
just to help out a little you might want to check your axle pins and make sure your not missing one. when i had my revo it was doing the same thing and thats what the problem was. just trying to help.


Thanks, I will check that out. She is up on blocks right now due to the CRASH on Saturday. Parts should be arriving soon. Anyway thanks for the tip.


Hawk
 
Back
Top