TRDStreetFighter
RCTalk Addict
- Messages
- 547
- Reaction score
- 0
- Points
- 0
- RC Driving Style
Okay I finally decided what I was going to do for my next project
I was going to get a Savage 25 and keep it stock...
but then I didn't wanna spend money for another Savage that is less powerful/durable then what I have
then I was going to get another used Savage for $200 and do something with that
I didn't wanna repeat what I have already
so finally I decided to order the Twin Engine conversion... and build it with my stock parts I am not using
INCLUDES:
(1) 3.2mm TVP EXTENDED Chassis Side Plates for Twins,
(2) Special .21 Motor Mount,
(1) SUPER DUTY 4.7mm Twin Engine Base Plate
(1) EXTENDED Center Dog Bone rear
(1) Fuel Tank and Mount Plate,
Linkage, Fuel Line & Tees
for $249
now I still have my stock plastic parts from my orignal Savage and I am going to use them:
I have the lower arms
Bulkhead
skidplates
tie rods
pins
C-Hubs
stock dog bones
stock drive line
2 stock headers and pipe
stock internal gear from transmission
different spur gears
stock servos
UFO wheels with Mayhem tires
stock tank w/primer
cup joints
stock shocks
rest I can get from my LHS which I get %20 off on parts
which will all add up less than $40
then get 2 WASP for $315
JR RS300 = $60
probably around $664 instead of $1058 for a new one
on order and ready for the holidays... my x-mas gift for myself
I was going to get a Savage 25 and keep it stock...
but then I didn't wanna spend money for another Savage that is less powerful/durable then what I have
then I was going to get another used Savage for $200 and do something with that
I didn't wanna repeat what I have already
so finally I decided to order the Twin Engine conversion... and build it with my stock parts I am not using
INCLUDES:
(1) 3.2mm TVP EXTENDED Chassis Side Plates for Twins,
(2) Special .21 Motor Mount,
(1) SUPER DUTY 4.7mm Twin Engine Base Plate
(1) EXTENDED Center Dog Bone rear
(1) Fuel Tank and Mount Plate,
Linkage, Fuel Line & Tees
for $249
now I still have my stock plastic parts from my orignal Savage and I am going to use them:
I have the lower arms
Bulkhead
skidplates
tie rods
pins
C-Hubs
stock dog bones
stock drive line
2 stock headers and pipe
stock internal gear from transmission
different spur gears
stock servos
UFO wheels with Mayhem tires
stock tank w/primer
cup joints
stock shocks
rest I can get from my LHS which I get %20 off on parts
which will all add up less than $40
then get 2 WASP for $315
JR RS300 = $60
probably around $664 instead of $1058 for a new one
on order and ready for the holidays... my x-mas gift for myself