factory carb settings???

[t-maxx_mumbler]

i cabt seem to get the carb set up right does any one have nay odea what the factory setting for the carb are i will have to start form scratch but i really want to drive ...

 

[bustedgears]

Assuming this is the trx 2.5 I'd say go flush on the LSN, then one turn in from flush on the HSN and start from there.

 

[Chris C]

The factory setting on 2.5 3.3 is the same. You need to set your main needle 4 turnes open from the closed position. Your low speed should be the screw flush with the carb body. Be sure to retune your engine or you may run it to hot and do some damage. Just remember that it is better to go too rich than to lean. Always start out rich and work your way to a leaner setting but keep a close eye on how hot u are running.

 

[krisweff]

The factory setting on 2.5 3.3 is the same. You need to set your main needle 4 turnes open from the closed position. Your low speed should be the screw flush with the carb body. Be sure to retune your engine or you may run it to hot and do some damage. Just remember that it is better to go too rich than to lean. Always start out rich and work your way to a leaner setting but keep a close eye on how hot u are running.

yer highive gt a 2.5 tmaxx with a few upgrades i there carb i bought didnt have the idle speed screw in so i bought one but can't find the settings for it anywere can anyone help me

 

[seanmcgrath48]

Check out ''Bob D'' ''Factory carb setting''
It's ALL THERE. .