Engine tuning issues

[Banshee123]

Bit of a noob to the Nitro RC scene.
Recently purchased an HSP Truggy 1/8 with an SH 18. engine
I've messed up all the carb settings pretty stupid I know. And I was wondering if anyone could give me the stock settings.
Thanks

 

[Tunedfrog]

Usually factory default settings are the screws for the most part are flush with the housing or will get you in the ball park. A good rule of thumb is never turn more than a 1/8th of a turn or two hours on a clock. Lean to the right, rich to the left. They can be pretty finicky for sure so take your time....

 

[tntpoof]

https://nitrotek.freshdesk.com/supp...092734-factory-carb-settings-for-18-sh-engine..

 

[Banshee123]

Usually factory default settings are the screws for the most part are flush with the housing or will get you in the ball park. A good rule of thumb is never turn more than a 1/8th of a turn or two hours on a clock. Lean to the right, rich to the left. They can be pretty finicky for sure so take your time....

Thanks, ill give that a go.