- Messages
- 649
- Reaction score
- 964
- Location
- Paris somewhere
- RC Driving Style
- Bashing
- Racing
- Scale Builder
So I got an ECX Curcuit and I’m flipping it. I already installed a brushless system and a new receiver, but want a receiver box. Also any suggestions on being able to use a 3S LiPo? The battery tray barely fits my 2S.
Update: I just took apart the truck; parts that will need replacing are the shocks (I’ll be upgrading to aluminum), gear cover, screws, and wheel nuts will need replacing. I found a spur gear for it but the screw that secures the pinion is stripped. That and the pinion I want to replace. Any gearing recommendations from ECX 2WD owners?
Update: I just took apart the truck; parts that will need replacing are the shocks (I’ll be upgrading to aluminum), gear cover, screws, and wheel nuts will need replacing. I found a spur gear for it but the screw that secures the pinion is stripped. That and the pinion I want to replace. Any gearing recommendations from ECX 2WD owners?
Last edited: