Easy start wiring issue

[SVORay]

There is four electrical pins that stick up where the battery pack plugs in to the truck to start it. Well one of these pins ( the yellow, guessing it's a ground) broke off while starting it the other day. Is there a way to fix this other than removing/replacing the exsisting harness with a new one?


Thanks
Ray

 

[ZANDOR]

You could try to find a new pin to crimp on it..
But for 5$I would just replace it
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXJM35&P=7

My self i pulled the EZ start off and installed a P/S and got a good G/P ignitor

 

[SVORay]

Ah nuts...I should have used "EZ" instead of "Easy start" when doing my search on Tower Hobby :loser: Is there a trick to replacing this pice? It looks pretty easy except maybe the ground wire but figured I'd ask. Anyways, the truck is a friends and up to him what he wants to do with it. I just help out on small stuff like this or stuff I break since I use it a lot. It's living with me while my friend's house is getting remodeled.




Thanks Man
Ray

 

[olds97_lss]

It should be pretty easy. The ground (yellow) goes to the engine mount, 2 wires to the motor on the starter and the blue wire to the glow plug.

 

[SVORay]

It should be pretty easy. The ground (yellow) goes to the engine mount, 2 wires to the motor on the starter and the blue wire to the glow plug.

Thats what I was thinking but I figured I go a head and double check. I got one ordered off ebay for 5.59 shipped. So hopefully I can get all three trucks up and running by next weekend. It's just a little more experience under my belt, exspecialy with doing the oil in the Revo's Diffs. Heck, after a year or two of this, I'll know atleast a quater of what you guys know


Thanks
Ray