Dynamite Slick Tires

[pmoyer]

hey all,

I've been looking around for a good tire that gets alot of traction.. I've tried foams which didnt work, a really low percent shore street tire, 25 percent, and nothing seems to be working for me. So i was wondering if anyone out there has tried this tire before and if they liked it.. Also i need to see if it fits a nitro TC3?? Thanks for the help.

Keith

 

[pmoyer]

sorry i forgot to include the link... http://www.dynamiterc.com/Products/Default.aspx?ProdID=DYN7953

 

[Nitrobuzzard]

Not trying to sound smart but hows the car setup? If the car isn't setup properly it won't matter what your running on the ground. I'm running foams, 26mm in the front/30mm in the rear and the car sticks like glue. Foams are better than glue-on rubbers in my opinion, but that's just my

Refer back to the manual for setup specs. It will give you a good base point to start but everyone has a different style of driving so it will need to be tweaked to your style and liking. Change only one thing at a time and make a note of what the outcome is. (i.e. tire wear, handling, etc.) If you don't have a manual go here...

http://www.rcdocuments.com/Team_Associated_Nitro_TC3_RTR_Manual.pdf

(Thanks to fasteddy for that) Setup tips start on pg. 31.

Good luck with it.......its well worth the effort after you get it dialed in..........


As far as the tires in the link, as long as they have a 12mm hex and are 26mm.....they will work


-Nitro

 

[rcnut143]

I use the dynamite tires on my RS4 and they hook up good on parking lots. The grippyness wears off quickly. Mine lasted about a month with heavy useage. good cheap tires.