Dremel Tool Question

[JSY0829]

I have a stainless steel screw with a stripped head. I need a cutter for the Dremel tool so I can cut a slit and use a flat head screwdriver to get it out. Any idea which cutter I need or better yet does anyone have the Dremel cutter number?

Thanks

 

[SteelCityNitro]

for all the more trouble, can't you just get a new screw?

 

[Metalhead Matt]

Dremel bits come in kits that have an assortment of different cutting wheels, grinding discs and boring bits. You'll find a million uses for it, besides just rc. If you just want to buy a couple of cutting discs, just be sure and get one thick enough for a screw driver to fit.

 

[JSY0829]

for all the more trouble, can't you just get a new screw?

That's my plan but I can't get the old one out because it is stripped.

 

[SteelCityNitro]

That's my plan but I can't get the old one out because it is stripped.

Ah, (duh..) I didn't make that connection.. well I agree with metalheadmatt on this one

 

[robmob]

This is one of the better Dremel assortments. The EZ Lock is worth it's weight in gold IMO.

[ame]http://www.amazon.com/Dremel-710-02-160-Piece-Accessory/dp/B002L3RUWA/ref=sr_1_6?ie=UTF8&s=hi&qid=1263920483&sr=8-6[/ame]

 

[JSY0829]

Thanks everyone. Found what I was looking for.

 

[Scrogg]

Good deal, I was going to say get the fiber reinforced Cutoff wheel. They are the only ones that do not shatter if you side load the wheel while cutting. Very useful wheels, you cand sand and cut with them.

 

[frickenjoey]

Those work pretty good and Rob said the Ez-lock is amazing! The best thing I ever got for the dremel.

 

[bduce77]

the normal cutting disk works. just make one cut to fit a screw driver in the screw