damn accidents

[navillusjames]

So I drove into a tree better then being ran over by a truck I suppose. So the visable damage broken battery box, fuel tank, and some front bumper parts so I replaced all that now I run it just revs up no motion at all. I tightened the clutch nut and still nothing. I've only been rc ing for 5 months. I have a tmaxx 3.3 w/o reverse any advice is greatly appreciated

 

[superdave2]

check the spur and clutchbell mesh because you could have cleaned the spur gear of all the teeth on it so it wont catch and also you could have broke something in the tranny but not likley and another thing your motor could have moved which would mean that the spur and the clutchbell arnt together check them

 

[alpinehyperlite]

Check ur clutch as well.

 

[romeo_1984]

your motor could have moved

yeah i ran mine into a curb and my motor mount busted and my motor moved so check that!

 

[navillusjames]

broken engine mount right side any tips for installation and alignment?

 

[romeo_1984]

yeah put the engine on the mount than put the four screws in the chassis loose so you can move the engine slide it over so that a piece if paper wont slip out from between the spur gear and clutch bell but the paper can't be to tight either! warning if your alignment of the two gears is off you will be replacing your spur gear!