Controller question

[Newbie2]

Hello I was hoping someone could help me. I have 3 mgt4.60 trying to build 2 trucks and 1 parts truck but I like the controller on the parts truck and would like to use it on one of the others. What's the easiest way to do this. Thanks in advance

 

[WickedFog]

Depending on the controller, you may be able to grab another receiver for the other truck. If your radio doesn't have a multiple model memory though you'll have to bind the transmitter to each truck every time you want to drive the other truck.

If you grab a Flysky GT3 B or C, you can store up to 10 models in it. So you just switch in the menu which truck you want to drive. So all you need is the radio, which comes with a receiver, and a second receiver for the other truck.
https://www.amazon.com/dp/B08NHZDDVF/ref=cm_sw_r_cp_apan_i_FEKE3JPGBEEAXMWF992Y?_encoding=UTF8&psc=1

 

[Tunedfrog]

What controller do you have @Newbie2 ?
I use one radio for several rigs, I simply buy extra receivers like Wicked mentioned.

 

[Newbie2]

Depending on the controller, you may be able to grab another receiver for the other truck. If your radio doesn't have a multiple model memory though you'll have to bind the transmitter to each truck every time you want to drive the other truck.

If you grab a Flysky GT3 B or C, you can store up to 10 models in it. So you just switch in the menu which truck you want to drive. So all you need is the radio, which comes with a receiver, and a second receiver for the other truck.
https://www.amazon.com/dp/B08NHZDDVF/ref=cm_sw_r_cp_apan_i_FEKE3JPGBEEAXMWF992Y?_encoding=UTF8&psc=1

This is what I have 1 truck is finished and runs. The other ones almost ready and the last one I got for parts. I'm on (limited funds) if ya know what I mean. I want to use the controller from the parts truck on the one that's almost there. Just not sure how. Thanks for your reply

 

[WickedFog]

This is what I have 1 truck is finished and runs. The other ones almost ready and the last one I got for parts. I'm on (limited funds) if ya know what I mean. I want to use the controller from the parts truck on the one that's almost there. Just not sure how. Thanks for your reply

Oh, so you have two controllers already? You just need to put the receiver from the parts truck into the truck you want to use the controller with.

 

[Newbie2]

This is what I have 1 truck is finished and runs. The other ones almost ready and the last one I got for parts. I'm on (limited funds) if ya know what I mean. I want to use the controller from the parts truck on the one that's almost there. Just not sure how. Thanks for your reply

I forgot to send pics

This is what I have 1 truck is finished and runs. The other ones almost ready and the last one I got for parts. I'm on (limited funds) if ya know what I mean. I want to use the controller from the parts truck on the one that's almost there. Just not sure how. Thanks for your reply

Hello I was hoping someone could help me. I have 3 mgt4.60 trying to build 2 trucks and 1 parts truck but I like the controller on the parts truck and would like to use it on one of the others. What's the easiest way to do this. Thanks in advance

 

[Chubaka]

This is what I have 1 truck is finished and runs. The other ones almost ready and the last one I got for parts. I'm on (limited funds) if ya know what I mean. I want to use the controller from the parts truck on the one that's almost there. Just not sure how. Thanks for your reply

Can you post pics of the rradio? The truck has the reciever. If its multiple models as stated, just buy recievers. If you want to spend no money, you can move the single reciever from truck to truck. I've done that before, and currently am right now.

The reciever is the box esc(electric) servos, and battery holders plug (nitro) into.

 

[Newbie2]

I want to use the spektrum

 

[tntpoof]

ch 1 steering
ch 2 go motor
use either a Y splitter to add battery or plug it into bat.

 

[silver drill can]

ch 1 steering
ch 2 go motor
use either a Y splitter to add battery or plug it into bat.

this is a nitro, and his chassis has 3 servo's
I'm confident it's:
ch 1 to steering,
ch 2 goes to throttle/brake servo,
ch 3 goes to transmission shift servo,

 

[silver drill can]

View attachment 147275

The receiver is inside the box I marked red, you have 3 servos on both chassis. I marked them yellow. Pay attention to each plug's location and just reconnect them the same way. Also pay attention to the red/black/white pins. I pulled an image of a Spectrum rx. It has 3 channels and a battery connector.