• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • ✓ Friendly & passionate RC enthusiasts
    • ✓ RC tips & troubleshooting
    • ✓ Buy, sell & trade RC gear
    • ✓ Share builds & upgrades

combination

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
A

abs

RCTalk Qualifier
Messages
134
Reaction score
0
Points
0
Location
mumbai
RC Driving Style
  1. Bashing
  2. Racing
my cb is 19t/26. which gear should i use to match with this type of cb.
 
well the 26 will give u move speed but the 19 will give u more pulling compacity/ driving up steep hills
 
thanks for info, but i need to know what combination spur should i use? eg i have Cb with a low gear 19t and high gear 26t. will 63 spur and 70 sper mesh correctly or i need a different spur gear for it.
thks i advance.
 
19/26 works with stock spurs, which is 63/70. As long as the CB pinions have a difference of 7, they work with stock spurs.

I'm about to install 21/28 in mine... I run smaller/lighter tires, so the extra teeth on the pinion more than make up for the difference.

I ran 19/26 on mine (with stock spurs) and it wasn't enough speed with my setup. I'm guessing my engine will pull the taller gearing just fine though. As long as I stick with smaller/lighter tires. Even so, I'm sure it will give my teflon shoes a workout!
 

RC Builds

Back
Top