Littlemotor
Hardcore RCTalk User
Hospitality Award
Rig of the Month Winner
Build Thread Contributor
RC Showcase: 2
- Messages
- 2,212
- Reaction score
- 6,201
- Points
- 840
- Location
- PittsVegas, NC
- RC Driving Style
- Bashing
- Racing
Going through my stuff here at the LHS (Littlemotor’s Hobby Shop ), and unloading some items I’ll never use, what with running 1/8 off-road almost exclusively..
Castle Creations Sidewinder 3 Waterproof ESC, and Castle Creations 4600Kv sensored motor. These are literally like new, and have less than one pack through them both.
$100—-***SOLD!***
Pro-Line Trenchers 2.2 wrapped over Pro-Line Desparado wheels w/12mm hex. These were LITERALLY installed on the vehicle, ran about 80ft, and removed. The serrations from the wheel nut is imprinted one time, and not over torqued. The rubber flash from the production process is still visible down the centers of all (4). Not a single crack in the glue job, or any “haze”/fogginess what so ever. Literally BRAND NEW. I did not even clean them up as I am not one to hide shiit, or dress an item up to make it look better than it is for a sale.
$45—-***SOLD!***
Pro-Line PowerStroke 1/10 SCT Rear Shocks
These are in perfect working order, full of fluid, and no mechanical issues to speak of. There IS very slight missing powder coat on the face of one of the shock caps due to 1/10 not utilizing plastic bushings between the cap orifice, and the standoff. This is absolutely normal, and is not at all visible when installed. Also, these have been very popular shocks for 1/10 vehicles for a lonnnnng time. Please use you melon, and do NOT attempt to run these on a 1/8 buggy (unless you hate having straight shock shafts ). These are $61 on Horizon currently. Again-great shape, and zero wear. Even the pivot balls exhibit ZERO slop within the shock end.
$40—-***SOLD!***
Castle Creations Sidewinder 3 Waterproof ESC, and Castle Creations 4600Kv sensored motor. These are literally like new, and have less than one pack through them both.
$100—-***SOLD!***
Pro-Line Trenchers 2.2 wrapped over Pro-Line Desparado wheels w/12mm hex. These were LITERALLY installed on the vehicle, ran about 80ft, and removed. The serrations from the wheel nut is imprinted one time, and not over torqued. The rubber flash from the production process is still visible down the centers of all (4). Not a single crack in the glue job, or any “haze”/fogginess what so ever. Literally BRAND NEW. I did not even clean them up as I am not one to hide shiit, or dress an item up to make it look better than it is for a sale.
$45—-***SOLD!***
Pro-Line PowerStroke 1/10 SCT Rear Shocks
These are in perfect working order, full of fluid, and no mechanical issues to speak of. There IS very slight missing powder coat on the face of one of the shock caps due to 1/10 not utilizing plastic bushings between the cap orifice, and the standoff. This is absolutely normal, and is not at all visible when installed. Also, these have been very popular shocks for 1/10 vehicles for a lonnnnng time. Please use you melon, and do NOT attempt to run these on a 1/8 buggy (unless you hate having straight shock shafts ). These are $61 on Horizon currently. Again-great shape, and zero wear. Even the pivot balls exhibit ZERO slop within the shock end.
$40—-***SOLD!***
Last edited by a moderator: