Carb settings on tmaxx 3.3

[Cyclone029]

I just got a used 3.3 and I need to know what the factory settings are for the carb I'm having major issues tuning please help

 

[outlawbrett]

HSN, if i can remember, shud be 4 turns. LSN shud be flush with inside part of barrel. make sure ur idle gap is between .07mm to .10mm i use a smaller paperclip to measure. if its cold where ur at, u mite have to richen up slightly from those settings. but use em as a base to get it running

 

[Cyclone029]

K so I am new to this so what screw is what

 

[Snook Man]

http://traxxas.com/support/Factory-Carburetor-Settings-TRX-25-25R-and-33

 

[g-money69]

HSN, if i can remember, shud be 4 turns. LSN shud be flush with inside part of barrel. make sure ur idle gap is between .07mm to .10mm i use a smaller paperclip to measure. if its cold where ur at, u mite have to richen up slightly from those settings. but use em as a base to get it running

Hi quick question. I was told that the LSN default is 1/2 turn out. Is that accurate?

 

[Greywolf74]

Hi quick question. I was told that the LSN default is 1/2 turn out. Is that accurate?

Try reading the whole thread. Woulda saved you the time of typing out that question and would have saved me time from having to respond to it. IJS