brushless e maxx runtime

[honda237]

dual lipo charging on one charger

I was wondering what the runtime would be for a brushless e maxx on 6 cells 3200 mah lipos. Is there any way to charge two lipos on one lipo charger. I have a duratrax ice.

 

[abadk9420]

Duratrax ice can only charge 1 battery at a time. as far as run time goesalot of that depends on what brushless motor you are running. I have the novak HV 6.5 set up in my E Maxx and with my 4200 nimh 6 cells I get 20 plus minutes of just bashing around.

 

[honda237]

I know it can only charge one battery at a time but is there a way that I can make a connector plug into both lipos and then plug in to the one plug on the charger and then change the settings on my charger. I was wanting to hook up two 3 cell 3200 lipos in to one 6 cell 3200 lipo on the charger.

 

[abadk9420]

I don't believe that the Ice charger is able to charge 6 lipo cells I believe that it has a max of 4 0r 5 lipo cells at on time...
this is out of the Ice Manual,
Input Voltage: 11-15V DC
Battery Types, # of cells: 1-10 Nickel-Cadmium cells (1.2 - 12.0V NiCd)
1-10 Nickel-Metal Hydride cells (1.2 - 12.0V NiMH)
1-4 Lithium-Ion or Lithium-Polymer cells
(3.6 - 14.8V Li-Ion/Li-Po)