Brake/Throtle Servo

[GruberRacing97]

I have a 2 Hitec 645's in my buggy, but it dont seem to have enough ass for a solid stop. Is this true? If so what servo should I use???

Thanks
Stan

 

[Plaidfish]

that should be more than enough for the stopping power......it's the speed of that one that's not great for T/B.....if it's new see if you can exchange it for the 625MG.......you might need to tighten teh linkage up (the stops and/or extend the fuel tube to limit play)

 

[olds97_lss]

Or you have the brakes too far out on the arm so your not getting a lot of torque out of it.

 

[GruberRacing97]

that should be more than enough for the stopping power......it's the speed of that one that's not great for T/B.....if it's new see if you can exchange it for the 625MG.......you might need to tighten teh linkage up (the stops and/or extend the fuel tube to limit play)

I do have a 625 I can try

Or you have the brakes too far out on the arm so your not getting a lot of torque out of it.

So moving the linkage closer to the servo gives more torque? or truer torque rating?

 

[olds97_lss]

The torque rating is at 1 inch from center I believe. Moving closer to center gives you more torque, just less throw.

 

[GruberRacing97]

The torque rating is at 1 inch from center I believe. Moving closer to center gives you more torque, just less throw.

Thanks Olds:thumbup: