• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • ✓ Friendly & passionate RC enthusiasts
    • ✓ RC tips & troubleshooting
    • ✓ Buy, sell & trade RC gear
    • ✓ Share builds & upgrades

Bay area

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
nice but not to informative... hmmm this leaves about as much info as,, well ,, as where we started.....
so give it up where is it at?

Originally posted by StrechM
An hour and 45 minutes away... Sacramento area.
Click to expand...

ummm,
where?
brisbane is about 10 minutes below me and we neeeeeed a place to race tomorrow. so far , either going up near tahoe or south to san jose.. but if brisbane has something going on ,, spill it, lets get some peeps together.. norcal so far sucks for offroad racing...



Originally posted by Rolex888
SF here dude. There's a great place over in Brisbane.
Click to expand...
 
Antioch (like someone mentioned) at DeltaRc.com saturday mornings,, and all I have to say is bring your horsepower, since yesterday was the opening day of the outdoor offroad season, everyone had a pretty level playing field.. and the track is nice and roomy, quad jump on the back side , triples infield, doubles table top with a wege, and a filler on the backside. more doubles, fatty straight, more doubles/rhythem. Nice nice track,, many props to the crew for makin it come together like it did...
anyways , and thursday nights in napa at extreme motorsports ..

Thats my commitment for the weeks ahead, going to try to start going down to Gilroy,..
anyone one want to convoy to these places, or hit up the big events, let me know.
 
I am in Nor-Cal woohoo! In sacramento Capital City RC is the best place to race.

I will be heading out to Deltarc.com soon to see if the people who race out there are any good....I hear mixed reports. Everyone agrees the track is good but the electric competitions seems to be just okay. I hear the 1/10 sportsman nitro is where the competition is at...I plan seeing how people size up in that class.

Tired of stomping on the peeps in my local point series race.
 
Then Sign up for expert, sportman is just to get warmed up on, no?

saturdays at antioch, I'm sure you might have some fun...

-Will-
www.WilzWerx.com
 
Capital City RC's track is to small. Not enough room to run anyone of mine let alone it's indoors without the proper ventilation. The track layout is perfect for low geared electrics.
 
SO where all the spots to go bashin in my new savage, I just recently moved to sacmento.
 
Last edited:
Sac has no shortage of places to bash. Find a patch of dirt with some jumps. I make it to Sac once or twice a month and cop a woodie just driving down the freeway looking at all the spots that are prime for bashing. Its gone now but a great example was the patch of land they were developing into the new off ramp on Howe Ave and I-50. It was a playground for RC for around 5-6 months.

Find wherever they are building a new sub devision or mall. Ask the local kids where they ride their bicycles, their bound to know all the spots.
 
Originally posted by SSchevelle
SO where all the spots to go bashin in my new savage, I just recently moved to sacmento.
Click to expand...
PM me and I'll direct you to a nice site.
 
Originally posted by StrechM
Capital City RC's track is to small. Not enough room to run anyone of mine let alone it's indoors without the proper ventilation. The track layout is perfect for low geared electrics.
Click to expand...

The track is 1/10 scale........

Originally posted by HIREz
Then Sign up for expert, sportman is just to get warmed up on, no?

saturdays at antioch, I'm sure you might have some fun...

-Will-
www.WilzWerx.com
Click to expand...

I would sign up for Expert if we had enough people to run expert (we need four people to make a class)......

Do you run at Deltarc? If so what is your name? People from Cap. City RC tell me every week to come out to Deltarc to run gas truck........I will be making my official debut at Antoich soon.....do not worry you will know when I come if you are there on Saturday (obviously).....
 
Originally posted by zoeybadm


The track is 1/10 scale........
Click to expand...
Stadium trucks and smaller. They took one look at a couple of my 1/10th scales and said no, to much pollution and way to fast. Been there several times and always got the same answer. The track is just a couple of miles south of my office on Watt Ave.
 
that is weird...what 1/10 scales are you running? All my cars are 1/10 scale and I have never been told to get lost.....
 
They never said get lost. What I was told is that they would allow the electrics and the smaller gas stadium truck types to race and pratice. About 3-4 months ago on 2 occasions they said no. They were my 2 ext. 26 T Maxxes (1/10th) which are the ones that I wanted to race (both are sold now). The 2 I have left are my Mutant Maxx and SUT which are definite no.
 
Ladies I will be at www.deltarc.com or Antoich on May 8th to race a number of classes. So if anyone wants to come out and have some fun racing let the fun begin.
 
Last edited:
Ladies? whatchu talkin about, you're the new guy at antioch, rule is you're supposed to bring em to share.
Gotta read that rule before you come out, don't want to have a party foul first time on the track.






Originally posted by zoeybadm
Ladies I will be at www.deltarc.com or Antoich on May 8th to race a number of classes. So if anyone wants to come out and have some fun racing let the fun begin.
Click to expand...
 
Originally posted by HIREz
Ladies? whatchu talkin about, you're the new guy at antioch, rule is you're supposed to bring em to share.
Gotta read that rule before you come out, don't want to have a party foul first time on the track.






Click to expand...

Hirez if I can drag the ladies out to Antoich believe me I will...as many as I can drag. Anyway, what tires are you guys running for Antoich right now (I heard from a couple guys that R3 holeshots are the way to go). I realize that may change before the 8th but I just picked up four pairs of holeshots because I like the tire on the T4, GT, and B4.

Also what tire are you guys running for the 1/8th scale? Also post up a pic of your ride(s) so I will know which guys is Hirez....see ya out at Antoich.
 
If you grab a bunch with long hair, you can pull more from one hand and still carry your R/C gear in the other hand.. haha, ok ok if my girlfriend sees that shes gonna drag me around by sumthin..
The 8th is what , 2 weeks away? why dont you come out on a regular basis? any-who, regular tires are crimefighters on 1.8th buggies, and some step pins for 1/10th truck in prolines, and komodo2's for 1/8th and the studs for 1/10th truck in panther. besides that everything else is crapola..
if you need any of this gear, let me know , I'm in S.F. and I usually have most all this on hand, new in package. for 4 - 1/8th tires 35 bucks a set, with dish rims 45.00 .... (either brand)
1/10th truck tires, 30 bucks for 4, no rims available(either brand)
Lates,
-Will-
www.WilzWerx.com

oh just ask around for Will, the body guy, that always has RB motors, Fioroni, Racers Edge and Airtronics servos,, lolzz..
I'll be the only one running 1/8th Sportsman Gas that can NEVER get his clutch settings correct..
 
I am looking for the tires you have listed but have not found them anywhere thus far. Could you please re-list the tires like below

Type of car: Manuf. Type
1/10 Nitro Truck Pro-Line Step Pins

The reason I ask is because it is hard trying to find the tires you listed minus the pro-lines.

Which classes are you going to run? Just 1/8 scale with your serpent?

I do not have the time on the weekend to go out there most of the time. For example I will be in LA this weekend on business and last weekend I had a wedding to attend....you know that kind of crap.

Also why doesn't deltarc.com update the freaking track pics?
 
haha cause they're slack asses and k-no nothing about computers,, but you can go to rcpics.net and check it out, or I'm giving some video to my friend and having him do some midget work for me compressin it, then I'll host some pics -n- video..
if you're looking for anything in the way of product just drop me an email from the site, www.WilzWerx.com and state your interest, as I'm always there or painting, not here...
lates,
-Will-
www.WilzWerx.com
oh saturdays are for 1/8th offroad only, onroad is for little girls and women, hahahaahahhaa. That little 7xx killer is just something I made to give the sh*t-talking MRX owners a swift kick in the ass, when they down-talk 200mm cars, now it just sits.. and waits...and waits...



Originally posted by zoeybadm
I am looking for the tires you have listed but have not found them anywhere thus far. Could you please re-list the tires like below

Type of car: Manuf. Type
1/10 Nitro Truck Pro-Line Step Pins

The reason I ask is because it is hard trying to find the tires you listed minus the pro-lines.

Which classes are you going to run? Just 1/8 scale with your serpent?

I do not have the time on the weekend to go out there most of the time. For example I will be in LA this weekend on business and last weekend I had a wedding to attend....you know that kind of crap.

Also why doesn't deltarc.com update the freaking track pics?
Click to expand...
 

RC Builds

Back
Top