Bashing from 2020/05/13 - 2020/07/11 - stampede, ejato, outcast, ERBEv2

[olds97_lss]

Got out on Saturday to try some changes at the grass bmx track with my eJato, stampede and outcast. The ejato didn't do too well, just a lot of tire spinning. The stampede and outcast did pretty good. This was the first time I ever ran the stock tires on the outcast. Figured with the higher temps outside, I should try the OEM tires. They work pretty well. I did wrap them with kevlar like I do my trenchers. I didn't want to blow them off the rims.
2020/07/11: Bumped the gearing up in the stampede from a 19T to 20T

2020/07/08: ejato and stampede
Changed the motor in the stampede to a HPI Tork 2200kv. Changed the motor/esc in the eJato to a max10 sct and hobbystar 3665 3100kv. Also bumped up the pinion to a 20T from 18T.

2020/06/14: eJato and stampede. eJato had a weird hesitation issue when I'd give it throttle hard.

2020/06/07: ERBEv2 and stampede

2020/05/31: ERBEv2 and stampede

2020/05/27: outcast and stampede. Put a 4074 2200 motor and 19T pinion in the stampede.

2020/05/25: outcast and stampede

2020/05/13: outcast and stampede

 

[Tunedfrog]

Cool video's. How was your temp when you bumped up to 20T?

 

[olds97_lss]

I was seeing 145F on the esc and 150F on the motor, so a bit warmer than I'd prefer at the esc. Did fine at the skate park, but the grass and a lot of WOT running made it run a bit on the warm side. I was somewhat surprised at the run time. The last run at the skate park got me 25 minutes, but at the bmx, it petered out at 15 minutes!

 

[Tunedfrog]

A bit warm but not terrible...

 

[olds97_lss]

I'll leave it and see how it does. If it starts to thermal the esc on me, I'll drop it back down to the 19T. I only had one pack on it. Although, I'm wondering if that's partly the reason it ate up the battery so much quicker. Eh... I leave it and see what it does.