AE Monster GT 4.6SE Brakes

[Markthetart]

HI there - the brakes on my truck are poo - please could someone advise which brake disk/pads to get and where from - also is it worth upgrading the throttle/brake servo? TIA Mark

 

[CertifiedMike]

https://www.vertigoperformance.com/...ducts_id=335&zenid=4pci7n7rmcivhk748kdmj01sc6

I'd go stock or carbon fiber like this one.

Whats wrong with your brakes?

If you have an older, lower torque servo, a stronger servo should get you better brakes.

I wouldn't be looking for miracles though. All the weight at speeds needs to be slowed by a single, not very large disc. Stopping isn't as fun as driving anyways!

WELCOME TO RCTALK.COM!!!

 

[WoodiE]

@Markthetart, when I had my Associated Monster GT years ago, I used to run a similar set of these titanium brake disc with fiber plates, and they were a huge upgrade over the stock.

Also, try adding a piece of fuel tubing to the brake linkage, tends to help as well. For example:

 

[CertifiedMike]

@Markthetart, when I had my Associated Monster GT years ago, I used to run a similar set of these titanium brake disc with fiber plates, and they were a huge upgrade over the stock.

Also, try adding a piece of fuel tubing to the brake linkage, tends to help as well. For example:

View attachment 232013

Yes!!! Def be sure that your linkage is actually working correctly before you buy anything!
The fuel line is a great trick!
This brake looks REALLY nice too!