Advice on tires for bashing

[SMaxxin]

Well I'm kinda set on the Moab tires with the Monster clawz 6 spoke but it doesn't say if the Moab's will fit being a 40 series tire but I'm pretty sure they will. I got some issue of RC driver and they got a set of Moabs mounted on a set of those wheels for a Jato to bash in. I reallize the trucks are different but it should work on a set of Maxx RPM monster claw 6 spokes, shouldn't it?

Now my next mod may not go over so well with some people....I'm seriously thinking of buying a spool for the rear end

Thanks
Ray

Moab's will not fit on monster claw wheels. They will only fit on 40 series wheels. The Moab's will fit these wheels.

http://www2.towerhobbies.com/cgi-bin/WTI0095P?FVSEARCH=wheel+40+proline&FVPROFIL=++&search3=Go

Keep in mind you will loose some performance with the 40's and put more stress on you steering and suspension.

 

[SVORay]

Moab's will not fit on monster claw wheels. They will only fit on 40 series wheels. The Moab's will fit these wheels.

http://www2.towerhobbies.com/cgi-bin/WTI0095P?FVSEARCH=wheel+40+proline&FVPROFIL=++&search3=Go

Keep in mind you will loose some performance with the 40's and put more stress on you steering and suspension.

Well if that is the way you feel about it


My next runner up is these wheels and tires. So does anyone know if these wheels will work well with the Revo's suspension etc?

http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXCMW9&P=7

Thanks for the help :thankyou:
Ray

 

[SMaxxin]

They should work. Any wheel with a wide offset should fit without rubbing.

 

[SVORay]

CoOl

Those tires are on back order but I'll give'em a shot when ever I get them ordered and installed.

By chance you know if this pipe will work also and what I'll need to hook it up with?

http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXLTW8&P=7

Sorry, I'm trying to order this stuff all at once

 

[Monkey Wrench]

So long as you have the stock motor and header, it'll go right on.

 

[elmoredarren1]

so what tires are best for a dirt track with the stock tires i tend to slide everywhere hard to control in turns....
thanks for your input

 

[Monkey Wrench]

If the current tires are glued to the rims, I'd suggest getting new rims as well.

I like Proline Bow Ties myself, but the 40 series won't fit on stock rims.

 

[SVORay]

Ya I would get a new set of wheels/tires for sure. That way you can use the stockers as spares if you crack a rim or something.