hotwheels_stl
RCTalk Basher
OK, it's for dad too! He has been bothering me for a couple of years to get him a nitro car. And thanks to the casino he is gonna have a christmas to remember! I put a Storm RTR, an HRC35625S servo, a DYN2550 fail safe and a tuned pipe #Y88604 (can anyone tell me who makes this? Yellow packaging) on layaway last week. I plan to install a TRS after break-in. My questions to you fine folks are as follows:
1. I am fairly mech. and elec. inclined, I shouldn't have much problem at all learning with this set-up, should I?
2. I have read on a couple of threads about "turning the throttle back" before letting someone else drive their r/c. Is this something i could do to limit the amount of throttle my son would have at his disposel? (if he ever gets to play with it!) If so, how do I go about doing it? If not is there someway to limit it?
3. I've seen everything out there from titanium to aluminum to carbon fiber to stock replacement parts... for a car that will most likely never see a track but will most assuredly see it's fair share of bashing, what should I replace parts with once they start breaking?
Thank you for your time and thoughts.
HW
1. I am fairly mech. and elec. inclined, I shouldn't have much problem at all learning with this set-up, should I?
2. I have read on a couple of threads about "turning the throttle back" before letting someone else drive their r/c. Is this something i could do to limit the amount of throttle my son would have at his disposel? (if he ever gets to play with it!) If so, how do I go about doing it? If not is there someway to limit it?
3. I've seen everything out there from titanium to aluminum to carbon fiber to stock replacement parts... for a car that will most likely never see a track but will most assuredly see it's fair share of bashing, what should I replace parts with once they start breaking?
Thank you for your time and thoughts.
HW