a lil help with tuning plz....

[Grrlracer]

Hey guyz.. my truggy was tuned on the street and therefore didn't reach top speed while it was being tuned...

i took it to the park today and ran it to the max but most of the time when i put my finger all the way down it cut out.... i made sure the engine was warmed up properly before doing this...

on the needle on top do i turn it clockwise or anti-clockwise to keep it from cutting out on top speed...

thanx x

 

[alpinehyperlite]

probably need to richen it up a little bit, sounds like it is starving for fuel at high RPM's. So, counter.

 

[griemar]

Hey guyz.. my truggy was tuned on the street and therefore didn't reach top speed while it was being tuned...

i took it to the park today and ran it to the max but most of the time when i put my finger all the way down it cut out.... i made sure the engine was warmed up properly before doing this...

on the needle on top do i turn it clockwise or anti-clockwise to keep it from cutting out on top speed...

thanx x

Richen your HSN about 1/8 turn and test. Wash rinse repeat until it doesn't die.

 

[Grrlracer]

probably need to richen it up a little bit, sounds like it is starving for fuel at high RPM's. So, counter.

so a little to the left yeh?

 

[alpinehyperlite]

yep, but do it in very small increments.

 

[Switch]

once your motor gets hot, it should lean out a bit too....

 

[Grrlracer]

you guyz are great!

i need to learn myself instead of getting my neighbour to do it for me all the time,so i REALLY appreciate all this help!

thanx guys! *kiss*