• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • ✓ Friendly & passionate RC enthusiasts
    • ✓ RC tips & troubleshooting
    • ✓ Buy, sell & trade RC gear
    • ✓ Share builds & upgrades

3.3 axles

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Bkyd Basher

Bkyd Basher

RCTalk Addict
Messages
1,090
Reaction score
20
Points
158
Location
Stamford Ny
RC Driving Style
  1. Bashing
  2. Racing
hey guys what do i need to change from 2.5 axles to 3.3 axles? A arms carriers, or are the a arms the same between the two?
 
You will need new hubs and bearings. I would suggest going with RPM hubs. You would only need new a arms if your 2.5 is the very first original TMaxx, the stance was narrow therefore shorter a arms. Again, go with RPM if that is the case.
 
so the a arms are the same legth between the 2.5 and the 3.3 maxx? And could i use the stock carriers from my revo then?
 
Revo carriers are the same as the 3.3 spec tmaxx carriers and will work. You would also need the longer 3.3 spec toelinks.
 
ok so the toe links and the carriers would be all i would need to switch from the 2.5plastic axles in a 4910 to the 3.3 revo/tmaxx axles right?
 

RC Builds

Back
Top