3.3 axles

[Bkyd Basher]

hey guys what do i need to change from 2.5 axles to 3.3 axles? A arms carriers, or are the a arms the same between the two?

 

[Jerboybikes73]

You will need new hubs and bearings. I would suggest going with RPM hubs. You would only need new a arms if your 2.5 is the very first original TMaxx, the stance was narrow therefore shorter a arms. Again, go with RPM if that is the case.

 

[Bkyd Basher]

so the a arms are the same legth between the 2.5 and the 3.3 maxx? And could i use the stock carriers from my revo then?

 

[Snook Man]

Revo carriers are the same as the 3.3 spec tmaxx carriers and will work. You would also need the longer 3.3 spec toelinks.

 

[Bkyd Basher]

ok so the toe links and the carriers would be all i would need to switch from the 2.5plastic axles in a 4910 to the 3.3 revo/tmaxx axles right?

 

[Snook Man]

correct.

 

[Bkyd Basher]

Thanks, just priceing it out probably just go metal i guess.