2nd gear

[nlcmobsta183]

i have a exceed rc 1/10 ultra its been running good but it just stop switching to 2nd gear i try to lean out the engine but I'm having no luck getting it to switch to second anybody have any ideas how to fix it?

 

[flandersander]

tighten the slipper clutch? thats all i got

 

[itsalifeworthliving]

there is no trany adjustment.. you know, to change the shift points?

 

[nlcmobsta183]

I'm new at this i dont know how to do that

 

[itsalifeworthliving]

if it can be adjusted there should be a littl rubber port hole on the center diff if you pull the cap off and spinn the gears real slow, you will see a small allen screw in there. if you turn it counter clockwise it will shift sooner. it is the same on all my nitro's. but i am not familuer with your model. check it and let me know what you find

 

[nlcmobsta183]

ok ima try now ill let you know

 

[nlcmobsta183]

ok ima try now ill let you know

i found it I'm tryin now

 

[itsalifeworthliving]

sweet deal. it will take a couple of try's till you find the setting you like.. i like the motor to wind out as high as possible so you get a full range of rpm's from the motor

 

[nlcmobsta183]

thanks alot i fixed it tomorrow ima tweak it till i get it the way i like