• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • ✓ Friendly & passionate RC enthusiasts
    • ✓ RC tips & troubleshooting
    • ✓ Buy, sell & trade RC gear
    • ✓ Share builds & upgrades

2011 savage x 4.6

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Well I kind of figured if they fit the other Savages they should fit the XL but sure enough they claim it doesn't.
 
Last edited:
here they are on mine..

4ee16ff0.gif


cdd926ae.gif


6c757b60.gif
 
Ok those look different than the ones I saw on ebay. The ones on ebay are more rounded but they are listed under the same part number you gave me.
 
Last edited:
Last edited:
Yeah i found them and ordered them. I ordered them from Actvie Powersports. They were 10 bucks cheaper than everybody else.
 
Will Do! I know how you feel the plastic ends are a joke. I found some aluminum rod ends they work pretty good but I would prefer to eliminate them from the rear. The aluminum rod ends work great on the front steering turnbuckles.
 
Last edited:
not having turnbuckles is def nice.. u dont have to worry about anything
 
cwal1774 said:
Yeah i found them and ordered them. I ordered them from Actvie Powersports. They were 10 bucks cheaper than everybody else.
Click to expand...

yeah u got a good deal i think when mine were bought they were like 35 40 bucks.. i got them with the xl
 
SAV160HBN07 and SAV161HB07 this is the part number for the alloy rod ends. the first number is for the outer and the second number is for the inner. The inner rod ends are reverse thread.
 
Last edited:
soo... i got my lrpo 30 and I'm gonna seal it once i get up.. just ordered a new ofna jp4 pipe and hope it works well with the lrp 30.. it was between the 053,08,jp3,jp4 pipe and i got the jp4.. guess il have to wait and see how it works.. trial and error i guess lol.. I'm new to these pipes so..
 
got the lrp 30 installed and everything went together real smooth.. gonna break it in tomorrow. i sealed the engine and carb today and got to let it set for 24 hrs so il have some vids of it breaking in tomorrow hopefully.. here are some pics of the process

da120a39.gif

09d7e11f.gif

9e51c60e.gif


dynamite max life clutch with .9mm springs for now.. il try the 1.0mm if i dont like the .9mm
94c1a923.gif

2cfad2d4.gif

c5107372.webp

ae234ceb.webp

88f2588e.gif


now i just got to wait for my new jp4 pipe.. but for now il be running the stocker.. ehhh












now i just got to wait for my new jp4 pipe.. but for now il be running the stocker.. ehhh
 
finaly got to run the savage xl with the lrp today.. got about 5 tanks run through it and i hit a fence post.. broke the front c hub. sucks but parts are on the way.. here is a vid for u folks

[ame="http://www.youtube.com/watch?v=Bme_JYBqoHo&context=C3348984ADOEgsToPDskINySqazrje0xLdDWdMfbSb"]Savage xl lrp 30 - YouTube[/ame]
 
Yeah it was painful to drive right into it lol, I'm already loving the lrp. I've had them before but its been a while since i have had one in a savage xl. Thats a heavy truck and it still comes up alot. This is a video of my old revo with a lrp 30 lol...

[ame="http://www.youtube.com/watch?v=obo2LkSuAuM&feature=youtube_gdata_player"]LRP Revo .30 - YouTube[/ame]
 
Yea man how does that fit into a revo I have been thinking about trying to stuff that LRP into a T maxx or maybe even the new LRP .32 if possible
 
i got the new era big block mount.. it comes with everything for 90 bucks.. honestly for a tmaxx... the lrp 28 would be too much for it let alone the 30 or the 32 lol.. the lrp is a nutty motor.. i love it.. thank u for the comments.. il keep up to date with whats going on with it as soon as i get the parts
 

RC Builds

Back
Top