:lick: Today i had the fun and we all now Exiting job of first starts and break ins. Well i started out on a bad foot. the throttle linkage to the carborater is a pice of crap replacing with new motor soon anyhow. When i would apply throttle the lever or Link would bend backwords thats right backwords. the nice return spring mounted to the engine was to tight and caused this to happen. this is the posision of a normal throttle I this is what mine did / . had to move the spring to the front mount and further back on the ball end threaded side. this fixed the problem. now up to 4 tanks and climbing no broblems at all thus far.
Last edited:
