1/10 2wd, and 4wd buggy guys INSIDE!

[Littlemotor]

Anyone on the board run a 1/10 2wd, or 4wd race buggy, and own a pair of calipers, and a straight edge,

I’m looking for some measurements on the rear wheels. MUST be new style 2.2’s. I wanna know width, and backspace. Hollar if ya hear me guys!

 

[DavidB1126]

I have both 2wd and 4wd. I don't have calipers and/or I probably don't have a straight edge lol. I can get back to you in the morning if I remember to get some rough estimates if you need
Obviously I have a measuring tape lol. Ugh so old school

 

[Littlemotor]

I have both 2wd and 4wd. I don't have calipers and/or I probably don't have a straight edge lol. I can get back to you in the morning if I remember to get some rough estimates if you need
Obviously I have a measuring tape lol. Ugh so old school

I do appreciate the reply bud, but I need accurate measurements +/-1mm for everything..

 

[DavidB1126]

accurate

I don't know what that is?

 

[Lumikko]

Is something like this helpful? Measurements taken from an AE rear wheel.

 

[CertifiedMike]

I will check my old Kyosho stuff if the new style wheels won't work for your application. Lmk.

 

[Littlemotor]

I will check my old Kyosho stuff if the new style wheels won't work for your application. Lmk.

Thanks man, but the measurements absolutely MUST be the current 2.2 buggy rears. I appreciate the thought.

 

[WickedFog]

I will check my old Kyosho stuff if the new style wheels won't work for your application. Lmk.

The new Kyosho legendary rears are like 1.9's

 

[Littlemotor]

I don't know what that is?

It’s what is required.

 

[Littlemotor]

The new Kyosho legendary rears are like 1.9's

See previous post.

 

[WickedFog]

See previous post.

Yeah, I know you need 2.2's. I was replying to Mike before he bothered to measure his.

 

[Littlemotor]

Yeah, I know you need 2.2's. I was replying to Mike before he bothered to measure his.

Ohhhhhhh… I’m a straight up Ruh-tahhhd… My mistake sir.

 

[CertifiedMike]

Thanks. I have 1.6, 2.0 and 2.2 for the Mid.

 

[WickedFog]

Thanks. I have 1.6, 2.0 and 2.2 for the Mid.

The mid's a 4wd

 

[Littlemotor]

1/10 buggy rears in the CURRENT 2.2 size is what I’m after.. 2wd, or 4wd. They are the same wheel. playing fitment games over here..

 

[DavidB1126]

Currently 2.2 2wd and 4wd read buggy wheels are the same. It's just the fronts that are different. 4wd fronts are standard. 2wd fronts either have wides or slims. 2wd tires fronts for carpet are low profile with no foam. While 4wd front tires for carpet are taller and with foam. Well sometimes.

 

[Littlemotor]

Currently 2.2 2wd and 4wd read buggy wheels are the same. It's just the fronts that are different

 

[CertifiedMike]

The mid's a 4wd

1/10 2wd, and 4wd buggy guys INSIDE! ​

 

[CertifiedMike]

I could pull the wheels off the B6.3? Thats 2wd AND modern AND 2.2"...

 

[DavidB1126]

That can work

I could pull the wheels off the B6.3? Thats 2wd AND modern AND 2.2"...

If you get accurate measurements